Reliable SpO2 Monitoring: Troubleshooting Common Issues with Unimed's SpO2 Sensors and Interface Cables

Investing in high-quality medical accessories is crucial since they determine the efficiency of any healthcare practice. Using and troubleshooting SpO2 monitoring equipment is crucial, making it essential to carefully choose the right equipment.


Unimed is one of the most reputable brands offering SpO2 sensors and interface cables that promise top reliability and performance. We provide products designed to help healthcare professionals closely monitor their patient's blood oxygen saturation to avoid worse conditions.

Today, we will look at the common issues with SpO2 sensors and how to fix them. Keep reading.


Common Issues With Spo2 Sensors And Interface Cables

Common SpO2 sensor issues include:

1. Poor signal quality due to interference or sensor misalignment

When the sensor is misaligned, or there is some sort of blockage on the sensor path, issues of poor signal arise. When this happens, it becomes a bit hard to get the desired results from the machines.


2. Cable disconnection due to damaged or loose cables

With time, the cables may become loose, especially when there are frequently connected and disconnected. Or they can be damaged due to poor use. Such cables will cause connection issues.


3. Incorrect readings due to inaccurate calibration or improper sensor placement

It is crucial to understand the proper calibration and placement of the sensors. Any wrong action will cause incorrect readings and, therefore, inefficiency.


4. Other potential issues that may arise

Understanding all sources of error in all medical supplies and equipment is vital for proper action. Aside from the ones mentioned above, you may get most issues from SpO2 sensors due to the following:

  • Environmental interference is like too much movement of vibrations. 
  • False readings to cold hands
  • Temporal falsely reduced saturation readings due to intravascular dyes.


How Unimed's Products Can Help

Despite these issues, there are always ways to handle them and ensure efficiency in your tools. It all starts with getting high-quality medical accessories from reliable sources. And that is where Unimed comes in.

Our solutions include the following:

1. High-quality materials and construction for durability and reliability

Every product from Unimed is designed from the highest quality material, meeting international standards. They are constructed to endure high-pressure use conditions and deliver top-notch reliability.


2. Multiple layers of shielding to reduce signal interference and noise

Signal interference is among the biggest issues affecting SpO2 sensors. And they happen due to poor construction quality. Unimed has used multiple shielding layers on the tools and the cables to reduce such risks, promising excellent performance and results.


3. High-quality connectors and adapters to reduce disconnection and ensure secure connections

If you were worried about loose connections, you no longer have to with Unimed products. The connectors and adaptors used have been thoroughly tested to ensure stability. You can be sure of more stable connections.


4. Regular calibration to ensure accurate readings and reduce the risk of errors

A high level of accuracy is expected with SpO2 sensors since they take extremely sensitive readings. We have designed our sensors with regular and automatic calibration, providing the highest level of reading accuracy. This reduces the chances of errors to great levels.


Troubleshooting Tips For Common Issues

You will run into specific issues even with the highest-quality SpO2 sensors. Do not panic. To troubleshoot the common errors mentioned above, follow these steps:

  • Check the cable connection and alignment to ensure a secure and proper fit
  • Inspect the sensor site for adequate placement and skin contact, and adjust if necessary
  • Verify power source and device settings to ensure proper operation

Most importantly, contact Unimed for additional support and troubleshooting assistance if issues persist. The team is always ready to offer any assistance whenever it arises.



The importance of reliable SpO2 monitoring cannot be overstated. Choosing the right tools and equipment does not only give accurate readings, but it can also save a life.

Unimed's products are designed with such a level of accuracy. The SpO2 sensors and interface cables are compatible with w wide range of patient monitors and pulse oximeters from major brands like Philips, GE, Ohmeda, DETEX, and Datascope. Also, all our products are CE and FA certified with validity for various markets, making them reliable.


Even with such quality, don't forget the importance of troubleshooting and resolving common issues in SpO2 monitoring. Doing so ensures accurate and reliable patient care. And it can save a life.


So, are you looking for the best SpO2 sensors and interface cables? Buy from Unimed today, and you will not regret it. Our dedication lies in delivering top-notch products while prioritizing customer satisfaction. For more information about Unimed and our wide range of products, please don't hesitate to reach out to us. We are always ready to provide the assistance and support you require.




Shop now

Unimed Medical have adhered to the customer-oriented service concept and dedicated ourselves to provide a one-stop shop solution at a full range, quality reliable and multi-compatible products to the customers.

Contact Us Now